Random good picture Not show

31. Through two methods of pretreatment, the industrial superhigh strength aluminium alloy LC9 showed good superplasticity in certain range of temperature and strain rate.

32. Demand of window of aluminium alloy door is 1600 square metre.

33. The composition of special-purpose degasifier for cleaning aluminium alloy is formed from fluorite, active carbon, calcium carbonate and potassium carbonate.

34. After treatment in this way, the aluminium alloy bars present a good superplasticity.

35. Aluminium alloy material basically has dichromatic , it is silvery white, it is dark brown, also appeared now nevertheless chromatic aluminium alloy, its main use is door window material.

36. The results showed that interface of intermetallic compound foam can move into aluminium alloy matrix.

37. Continous casting and extrusion ( CASTEX ) technology is adopted to produce 6201 electric aluminium alloy rod.

38. Successful tests on the silver plating on hard aluminium, pure aluminium and rust-proof aluminium alloy, are made and the mass production is finally carried out.

39. The design approach for aluminium alloy grid structures and the design results of Yiwu Natatorium are presented.

40. Founding - Technical conditions of delivery - Part 4 : additional requirements for aluminium alloy castings.

41. The aluminium alloy forgings were used for varieties of industrial departments.

42. The conductor of busbar can be round copper tube,(www.Sentencedict.com) aluminium alloy tube or bar.

43. The recent development in lithium aluminium alloy iron disulfide thermal battery in Tianjin Institute of Power Sources(TIPS)is reported.

44. It is a reference for anybody concerning quality of wrought aluminium alloy extruded profiles for architecture.

45. Abstract: The influence of cerium on the behavior of lithium - aluminium alloy anode was studied.

46. Two aluminium alloy stanchions for accommodation ladder were lacked, to be provided.

47. The variable polarity AC square wave power source is best equipment for aluminium alloy welding.

48. Suitable for mercury lamp, high - pressure sodium lamp, metal halide lamp. Features Diecasted aluminium alloy shell - sprayed surface.

49. At present, it is the largest-scale manufacturer for air compressor, aluminium alloy piston, link rod and gudgeon pin in china.

50. Break heat aluminium alloy to use metalloid material to have heat to aluminium alloy profile[sentencedict.com], improved the heat preservation heat proof quality of aluminium alloy window frame effectively.

51. Type VII: Made of aluminium alloy by mechanical cable - clamped device.

52. Whole process and manufacture practice of aluminium alloy electrotinning on automatic electroplate line are introduced.

53. Intermetallic compound foam reinforced aluminium alloy surface composite layer are obtained by solution treatment after low pressure Casting.

54. The 2 A 14 aluminium alloy large forged rings need thermo mechanical treatment.

55. B : Zinc alloy is too expensive aluminium alloy is ok.

56. The results show that coarse crystalline LC4 Aluminium Alloy can present certain superplasticity at proper deformation temperature and velocity.

57. The homogenization is an important heat treatment step during wrought aluminium alloy production, it influences greatly the quality of the products.

58. Good knowledge of aluminium alloy and grey iron casting and machining processes.

59. The aim of this study is to investigate the effect of cobaltous acetate doping on the corrosion resistance of sol-gel coatings on aluminium alloy LY12.

60. The effect of alternating magnetic field frequency on the meniscus, microstructure and element distribution of the static formed ingots of minitype square billet of 7050 aluminium alloy.